Protege DX L4-1.6L DOHC (2000)
Camshaft Gear/Sprocket: Service and Repair
Camshaft Pulley Removal Note
1. Temporarily install the No.3 engine mount.
2. Remove the SST (engine support).
3. Hold the camshaft using a wrench on the cast hexagon as shown.
Alignment Marks
Camshaft Pulley Installation Note
1. Install the camshaft pulleys with the "I" mark (intake side) or "E" mark (exhaust side) as shown in image.
2. Hold the camshaft using a wrench on the cast hexagon as shown.
Torque Specification: 37-44 ft-lb.
