Protege DX L4-1.6L DOHC (2000)
3. Remove the oil pan using a separator tool.
MBSP (Main bearing support plate) Removal Note ZM
1. Using a separator tool, separate the MBSP.
MBSP (Main bearing support plate) Installation Note ZM
1. Apply silicon sealant to the shaded areas as shown.
2. Apply silicone sealant to the MBSP along the inside of the bolt holes.
Thickness: 2.5 - 3.5 mm (0.099 - 0.137 inch)
Oil Strainer Installation Note FP