Protege DX L4-1.6L DOHC (2000)
2. Install the new gaskets onto the oil pump body and the rear cover with the projections in the notches as shown. (ZM model)
3. Apply silicone sealant onto the area of oil pan gasket indicated by A and B. (ZM model)
Thickness: 2.0 mm (0.079 inch)
4. Apply silicone sealant to the oil pan along the inside of the bolt holes and overlap the ends.
Thickness
ZM: 2.5 - 3.5 mm (0.099 - 0.137 inch)
FP: 2.0 - 3.0 mm (0.079-0.118 inch)
Integrated Stiffener Installation Note ZM
1. Hand-tighten the lock bolt A.
2. Hand-tighten the lock bolt B.
