Protege DX L4-1.6L DOHC (2000)
Windshield Washer Spray Nozzle: Service and Repair
Removal/Installation
REMOVAL
1. Remove the bonnet insulator.
2. Disconnect the windshield washer hose to windshield washer nozzle.
3. Remove the windshield washer nozzle using a
10 mm {0.4 in} deep socket wrench from underneath the bonnet.
INSTALLATION
1. Connect the windshield washer hose to windshield washer nozzle.
2. Push the windshield washer nozzle into the installation hole.
3. Adjust the windshield washer nozzle.
4. Install the bonnet insulator.