Protege DX L4-2.0L DOHC (2002)
Keyless Entry Transmitter Battery: Service and Repair
TRANSMITTER BATTERY REPLACEMENT
1. Insert a small flathead screwdriver into the slot and gently pry open the transmitter.
2. Press the portion of the battery indicated by A and remove the battery.
3. Install a new battery (CR2025 or the equivalent) into the front portion of the holder with the positive pole (+) facing up. Press on the B portion of
the battery to set the battery.
4. Align the front and back covers and snap the transmitter shut.
Battery specification
Lithium CR2025 x 1
NOTE: The batteries will last about 2 years when used 10 times a day.
