Protege DX L4-2.0L DOHC (2002)
Front Door Window Glass: Service and Repair
FRONT DOOR GLASS AND GUIDE REMOVAL/INSTALLATION
1. Lower or raise the front door glass so that the distance from the top of the front door glass at the rear end to the upper part of the front beltline
molding is 130 mm {5.12 in}.
2. Disconnect the negative battery cable.
3. Remove the front door trim.
4. Remove the inner handle.
5. Remove in the order indicated below.
1. Door screen
2. Front door glass
3. Glass run channel
6. Install in the reverse order of removal.
