Protege DX L4-2.0L DOHC (2002)
Sunroof / Moonroof Panel: Adjustments
GLASS PANEL ADJUSTMENT
1. Fully close the glass panel.
2. Measure the gap and height between the glass panel and body.
-
If not as specified, loosen the glass panel installation screws and reposition the glass panel.
Clearance
a:
0.2 - 2.2 mm {0.008 - 0.086 in}
b:
0 mm {0 in}
3. Tighten the installation screws.
4. Insert a prepaid card between the weatherstrip and the body of the vehicle. Verify that the sunroof is shut tightly (there is resistance when the
prepaid card is moved).
-
If the sunroof is not shut tightly, readjust by performing Steps 3 and 4.
