Protege DX L4-2.0L DOHC (2002)
1. Apply approximately 1 g {0.04 oz} of silicone (Shin-Etsu Silicone KE-347W or similar)
Screw Installation Note
1. When installing a new stator and thermal protector, replace the screw.
Clamp Installation Note
1. When installing a new stator and thermal protector, replace the clamp.
Snap Ring Installation Note
1. When installing a new pressure plate, A/C compressor pulley, stator and thermal protector, or A/C compressor body, replace the snap ring.
