mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

A/C - Warm Air From Vents With Fan in #2 position|Page 3292 > < A/C - Warm Air From Vents With Fan in #2 position|Page 3286
Page 1
background image

Control Assembly: Customer Interest
A/C - Warm Air From Vents With Fan in #2 position

07-005/03 

2001-2003 Protege, 2002-2003 Protege5

A/C SWITCH LIGHT GOES OUT AND/OR FLASHES WITH FAN CONTROL SPEED IN NUMBER 2 POSITION

APPLICABLE MODEL(S)/VINS

2001 - 2003 Protege and 2002 - 2003 Protege5 built prior to 12/2/02 and with VINs lower than JM1BJ2***3*150990.

DESCRIPTION

Customer may experience warm air from the dash vents when operating the A/C system with the fan control speed set in the number 2 position for long
periods of time. This condition may be caused by the improper logic within the heater control unit. The heater control unit has been modified to correct
this concern.

Customers having this concern should have their vehicle repaired using the following repair procedure.

REPAIR PROCEDURE

1.

Verify customer concern.

2.

Remove and replace the heater control unit with a modified part according to Workshop Manual (section 07-40 CLIMATE CONTROL UNIT
REMOVAL).

3.

Verify repair.

PART(S) INFORMATION

WARRANTY INFORMATION

A/C - Warm Air From Vents With Fan in #2 position|Page 3292 > < A/C - Warm Air From Vents With Fan in #2 position|Page 3286