Protege DX L4-2.0L DOHC (2002)
Evaporator Assembly Note
1. Verify that the dent caused by contact with the polyuretane protector and cooler case (1) in the shaded zone is 3 mm {0.12 in} or less.
Adhesive Sponge Rubber Assembly Note
1. Attach the adhesive sponge rubber so that the heat sensing tube is hidden.
Insulator Assembly Note
1. Make the two insulators cross.
2. Attach the insulator so that the shaded zone of expansion valve is hidden.
A/C Amplifier Assembly Note
1. Assemble the evaporator temperature sensor as shown in the figure.
