Protege DX L4-2.0L DOHC (2002)
1. Measure the amount of unbalance with a wheel balancer.
2. Attach a balance weight corresponding to the measured weight value on the position (inner) indicated by the wheel balancer.
Caution:
^
Do not attach 3 or more balance weights.
^
One balance weight must not exceed 60g (2.12 oz.), and a total of 2 balance weights must not exceed 100g (3.53 oz.).
Remaining Amount of Unbalance Confirmation
1. After installing the outer and inner balance weights, operate the wheel balancer again.
2. Confirm that the remaining unbalance does not exceed 10 g (0.35 oz.) at outer and 8 g (0.28 oz.) at inner on either side.
^
If the remaining unbalance exceeds 10 g (0.35 oz.), perform wheel balance adjustment again.
Allowable remaining unbalance value (g)
Dynamic unbalance (at rim):
10 g (0.35 oz.) max. (outer)
8 g (0.28 oz.) max. (inner)
Static unbalance (at rim): 13 g (0.46 oz.) max.
