Protege DX L4-2.0L DOHC (2002)
- 1) Select the "BARO" PID and set the display units to "VOLT".
- 2) Select the "EGRCHK #" PID
- 3) Select the "SEGRP #" PID
- 4) Start the Engine
- 5) Press the tick.
- 1) Select the "BARO" PID and set the display units to "VOLT".
- 2) Select the "EGRCHK #" PID
- 3) Select the "SEGRP #" PID
- 4) Start the Engine
- 5) Press the tick.