Protege DX L4-2.0L DOHC (2002)
4. Push the SST quick release connector into the fuel distributor and fuel main hose into the SST until a click is heard.
5. Turn the lever on the SST as shown.
6. Connect the battery negative cable.
7. Start the engine and let it idle.
8. Measure the fuel line pressure after approx. 2 minutes.
Fuel line pressure
210 - 250 kPa {2.1 - 2.6 kgf/sq.cm, 30 - 36 psi}
9. Disconnect the vacuum hose from the pressure regulator and measure the fuel line pressure.
Fuel line pressure
270 - 310 kPa {2.7 - 3.2 kgf/sq.cm, 39 - 45 psi}
10. Turn the ignition switch off.
11. Disconnect the SST.
