Protege DX L4-2.0L DOHC (2002)
Throttle Cable/Linkage: Adjustments
ACCELERATOR CABLE ADJUSTMENT
1. Move the white locking tab A to the unlock position.
2. Turn stopper B to the unlock position.
NOTE: If the stopper B will not unlock, it may be necessary to carefully bend the tab C out using a suitable tool.
3. To adjust the free play, push or pull the accelerator cable housing directly behind the spring.
4. Turn the stopper B to the lock position.
Free Play: 1 - 3 mm {0.04 - 0.11 in}
5. Measure the throttle cable free play, making sure that it is within the specification.
6. Move the white locking tab A to the lock position.
7. Verify correct accelerator operation.
