Protege DX L4-2.0L DOHC (2002)
^
Power circuit (VSS connector terminal A to main relay terminal D)
^
Ground circuit (VSS connector terminal C to GND)
^
If an open circuit or short circuit is found, repair the malfunctioning wiring harness.
^
If there are no open or short circuits, perform the sensor rotor inspection.
Short Circuit Inspection
1. Inspect the following circuit for short.
^
Power circuit (VSS connector terminal A to main relay terminal D)
^
If an open circuit or short circuit is found, repair the malfunctioning wiring harness.
^
If there are no open or short circuits, perform the sensor rotor inspection.
Sensor Rotor Inspection
1. Remove the VSS.
2. Shift the selector lever to N position.
3. Inspect sensor rotor surface via VSS installation hole while rotating the front tire manually.
1. Is sensor rotor free of damage and cracks?
2. Is sensor rotor free of any metallic shavings or particles?
^
If sensor rotor is okay, replace VSS.
^
If there is a problem, clean or replace the sensor rotor.
