Protege DX L4-2.0L DOHC (2002)
Clutch Switch: Testing and Inspection
STARTER INTERLOCK SWITCH INSPECTION (MTX)
On-vehicle Inspection
1. With the clutch pedal not depressed, verify that the engine does not start.
2. With the clutch pedal fully depressed, verify that the engine starts.
-
If the above cannot be verified, carry out continuity inspection.
Continuity Inspection
1. Disconnect the starter interlock switch connector.
2. Inspect for continuity between terminals of the starter interlock switch using an ohmmeter.
-
If not as specified, replace the starter interlock switch.
