Protege DX L4-2.0L DOHC (2002)
Seals and Gaskets: Service and Repair
OIL SEAL (TRANSAXLE) REPLACEMENT
1. Drain the ATF.
2. Remove the drive shaft.
3. Remove the oil seal.
4. Using the SST and a hammer, tap a new oil seal in evenly until the SST contacts the transaxle case.
5. Coat the lip of the oil seal with transaxle oil.
Caution:
^
The oil seal is easily damaged by the sharp edges of the drive shaft splines. Do not let the splines contact the oil seal.
6. Install the drive shaft.
7. Add ATF to the specified level.
8. Carry out the mechanical system test.