Protege DX L4-2.0L DOHC (2002)
3. Remove the locknut.
ABS Sensor Rotor (With ABS) Removal Note
Note:
^
The sensor rotor does not need to be removed unless it is being replaced.
1. Remove the sensor rotor using a chisel.
ABS Sensor Rotor (With ABS) Installation Note
1. Set the SST as shown in the figure.
Caution:
^
Position the SST so that marking A faces the bottom.
2. Press on the new sensor rotor using the SST and a press.
Locknut Installation Note
1. Install a new locknut and stake it as shown.
Disc Brake Type
REMOVAL/INSTALLATION
Caution: