Protege DX L4-2.0L DOHC (2002)
Shift Interlock Control Module: Testing and Inspection
SHIFT-LOCK UNIT INSPECTION [SPORT AT]
1. Remove the shift-lock unit.
2. Connect the shift-lock unit connector.
3. Turn the ignition switch to ON position.
Part 1 of 2
Part 2 of 2
4. Measure the voltage at each shift lock unit terminal and refer to the terminal voltage table.
^
If not as specified, inspect the parts listed under "Action" and the related wiring harness.
-
If there is any malfunction, replace the shift-lock unit.