Protege DX L4-2.0L DOHC (2002)
1. Make a hole through the sealant except fasteners and spacers from the inside of the vehicle using an awl.
2. Pass the SST (piano wire) through the hole.
WARNING: Using a SST (piano wire) with bare hands can cause injury. Always wear gloves when using a SST (piano wire).
3. Wind each end of the SST (piano wire) around a bar.
4. Working with another person, saw through the sealant around the edge of the glass.
NOTE: Use a long sawing action to spread the work over the whole length of the SST (piano wire) to prevent it from breaking.
5. Remove the windshield.