Protege DX L4-2.0L DOHC (2002)
17. Use a scraper to smooth away any sealant that oozes out. Add more sealant to any points of poor contact. Adjust the sealant as shown it necessary.
Hardening Time Of Sealant
18. Before the surface of the sealant has hardened, install the windshield molding.
19. Align the marking on the molding with the inner side of the body groove. (1)
20. Install the upper edge starting from the outer ends and moving inward. (2)
21. Install the corners. (3)
22. Install the windshield molding installation clips to the cowl grille hole. (4)
23. Install the sides, starting from the upper edge and moving downward, being careful not to pull out the corners. (5)
24. Use isopropyl alcohol to remove any excess sealant.
25. Install the headliner.
26. Install the cowl grille.
27. Install the base.
28. Install the rearview mirror.
