Protege ES L4-1839cc 1.8L DOHC (1997)
Torque Converter Clutch Solenoid: Service and Repair
REPLACEMENT
1. Disconnect the solenoid connector.
2. Remove the control valve body.
3. Remove the solenoid valve.
4. Apply ATF to a new O-ring and install it, a new solenoid valve, and the oil strainer component. Tighten to:
7.9 - 10.7 Nm (70 - 95 inch lbs.).
5. Install the control valve body.
6. Lightly apply silicone sealant to both sides of a new oil pan gasket.
7. Install the new gasket and install the oil pan. Tighten to:
8.4 - 10.7 Nm (74 - 95 inch lbs.).
8. Connect the solenoid connector.
9. Connect the negative battery cable.
10. Carry out the time lag test and line pressure test.
11. Carry out the road test.