Protege ES L4-1839cc 1.8L DOHC (1997)
Seals and Gaskets: Service and Repair
REPLACEMENT
1. Drain the transaxle oil.
2. Separate the drive shaft and joint shaft from the transaxle.
3. Remove the oil seal by using a screwdriver.
4. Using the Special Service Tool (SST) and a hammer, tap the new oil seal in evenly until the SST contacts the transaxle case.
5. Coat the oil seal lip with transaxle oil.
6. Insert the drive shaft and joint shaft to the transaxle.
7. Add the specified amount and type of transaxle oil.
