Protege ES L4-2.0L DOHC (2001)
Antenna Cable: Testing and Inspection
FRONT ANTENNA FEEDER INSPECTION
1. Disconnect the negative battery cable.
2. Remove the audio unit.
3. Remove the driver-side front side trim.
4. Disconnect the connection between the pillar antenna and the front antenna feeder.
5. Verify that there is no continuity between the front antenna feeder terminals A and B using an ohmmeter.
-
If not as specified, replace the front antenna feeder.
6. Inspect for continuity between the front antenna feeder terminals using an ohmmeter.
-
If not as specified, replace the front antenna feeder.
