Protege LX L4-1.6L DOHC (2000)
Hazard Warning Flasher: Testing and Inspection
FLASHER CONTROL MODULE INSPECTION
1. Remove the bracket and pull it toward you.
Terminal Voltage List (Reference)
2. Measure the voltage at the flasher control module terminals as indicated.
3. Disconnect the flasher control module connector before inspecting for continuity at terminal B.
-
If not as specified, inspect the parts listed under "Action" and the related wiring harnesses.
-
If the parts and wiring harnesses are okay but the system still does not work properly, replace the flasher control module.
