Protege LX L4-1.6L DOHC (2000)
4. Inspect for an open or short circuit in the following wiring harnesses by probing the applicable sensor and SST (104 Pin Breakout Box) terminals
with ohmmeter leads.
Open circuit
-
GND circuit (CDCV connector terminal B and PCM connector terminal 18 through common connector)
-
Power circuit (CDCV connector terminal A and main relay connector terminal D)
Short circuit
-
CDCV connector terminal B and PCM connector terminal 18 to ground
5. Install the CDCV.
6. Connect the negative battery cable.