mazda Workshop Repair Guides

Mazda Protege LX Workshop Service and Repair Manuals

Removal/Installation|Page 2152 > < Removal/Installation
Page 1
background image

Fuel Pressure Regulator: Service and Repair
Before Repair Procedure

WARNING:

-

Fuel vapor is hazardous. It can easily ignite, causing serious injury and damage. Always keep sparks and flames away from fuel.

-

Fuel line spills and leakage are dangerous. Fuel can ignite and cause serious injuries or death and damage. Fuel can also irritate skin and
eyes. To prevent this, always complete the following Procedure.

Fuel Pressure Release Procedure

NOTE:  Fuel in the fuel system is under high pressure also when the engine is not running.

1. Remove the fuel-filler cap and release the pressure in the fuel tank.

2. Remove the fuel pump relay.
3. Start the engine.
4. After the engine stalls, crank the engine several times.
5. Turn the ignition switch off.
6. Install the fuel pump relay.

Removal/Installation|Page 2152 > < Removal/Installation