Protege LX L4-1.6L DOHC (2000)
3. Connect the SST (104 Pin Breakout Box) to the PCM as shown.
4. Tighten the connector bolt.
Tightening torque:
7.9 - 10.7 N.m {80 - 110 kgf.m, 69.5 - 95.4 in.lbf}
5. Connect the negative battery cable.
6. Measure the voltage at each terminal.
-
If any incorrect voltage is detected, inspect the related system(s), wiring harnesses and connector(s) referring to the Action column in the
terminal voltage table.
Terminal No: 1 - 6
