Protege LX L4-1.6L DOHC (2000)
Side Air Bag: Service and Repair
Air Bag Modules Disposal/Handling Procedures
WARNING:
-
Before scrapping a vehicle with a live (undeployed) air bag module, deploy the air bag module. Never dispose of a live (undeployed) air bag
module.
-
The air bag module is very hot immediately after it is deployed. You can get burned. Do not touch the air bag module for at least 15 minutes after
deployment.
-
Pouring water on the deployed air bag module is dangerous. The water will mix with the residual gases to form a gas that can make breathing
difficult. Do not pour water on the deployed air bag module.
-
The deployed air bag module may contain deposits of sodium hydroxide, a caustic by product of the gas-generated combustion. If this substance
gets into your eyes or on your hands, it can cause irritation and itching. When handling the deployed air bag module, wear gloves and safety
glasses.
1. Put on gloves and safety glasses.
2. Put the deployed air bag module in a plastic bag, seal it, and then dispose of it.
3. Wash your hands after removing your gloves.
