Protege LX L4-1.6L DOHC (2000)
2. Set the Special Service Tool (SST) onto the lower arm, and remove the bushing.
LOWER ARM BUSHING (REAR) REMOVAL NOTE
1. Remove the lower arm bushing using the SSTs and a press.
LOWER ARM BUSHING (REAR) INSTALLATION NOTE
1. Align the mark of the lower arm and the small projection of the lower arm bushing (rear) as shown in the figure.
2. Set the lower arm onto the SST (49 B034 211).
3. Press the new lower arm bushing using the SST (49 B034 212).
LOWER ARM BUSHING (FRONT) INSTALLATION NOTE
