Protege LX L4-1.6L DOHC (2000)
2. Install the selector cable to the selector lever.
Caution: Bending the selector cable in the manner shown in the figure will damage the cable and it may become loose when shifted. When
installing the selector cable, hold it straight.
3. Install the clip as shown in the figure.
Note: Install the selector cable to the manual shaft lever with the spring side of the selector cable end facing the front of the vehicle.
4. Install the selector cable to the manual shaft lever in such a way that the selector cable does not bear a load.
5. Confirm that the end of the manual shaft lever sticks out of the end of the selector cable.
6. Install the selector cable to the cable bracket.
7. Verify that the selector lever is at P position.
