Protege LX L4-16L DOHC (2000) Flex Plate Component Info, Specs
4. Apply sealant to the drive plate mounting bolts and install them.
5. Set the SST or equivalent against the drive plate.
Caution: When installing sealant covered bolts tighten them immediately. Leaving these bolts In a half installed condition could cause them to be
stuck that way, due to the natural hardening of the sealant.
6. Tighten the drive plate installation bolts in 2 or 3 steps as shown.
Tightening torque
97 - 102 Nm (9.8 - 10.5 kgf.m,70.9 - 75.9 ft. lbs.)
