Protege LX L4-1.6L DOHC (2000)
Seals and Gaskets: Service and Repair
OIL SEAL (DIFFERENTIAL) REPLACEMENT
1. Drain the transaxle oil into a container.
2. Separate the drive shaft and joint shaft from the transaxle.
3. Remove the oil seal using a screwdriver and seal remover.
4. Using the SST and a hammer, tap the new oil seal in evenly until the SST contacts the transaxle case.
5. Coat the oil seal lip with transaxle oil.
6. Insert the drive shaft and joint shaft to the transaxle.
7. Add the specified amount and type of transaxle oil.
