Protege LX L4-1.6L DOHC (2000)
1. Make a hole through the sealant except fasteners and spacers from the inside of the vehicle using an awl.
WARNING: Using a SST (piano wire) with bare hands can cause injury. Always wear gloves when using a SST (piano wire).
2. Pass the SST (piano wire) through the hole.
3. Wind each end of the SST (piano wire) around a bar.
NOTE: Use a long sawing action to spread the work over the whole length of the SST (piano wire) to prevent it from breaking.
4. Working with another person, saw through the sealant around the edge of the glass.
5. Remove the windshield.
6. Remove the dam from the windshield.
7. Remove the fasteners.
