Protege LX L4-1489cc 1.5L DOHC MFI (1998)
K.
Install spring, spring washer, lever and clip. Proceed to STEP 4.
Note
^
Make sure lever is facing the correct direction.
2.
Remove key cylinder assembly from vehicle.
3.
Pry off key cylinder cap and remove flap assembly. Discard cap and flap.
4.
Install new cap assembly.
5.
Install key cylinder assembly.
6.
Verify repair.
PART(S) INFORMATION
WARRANTY INFORMATION
Note
^
This information applies to verified customer complaints on vehicles covered under normal warranty. Refer to the SRT microfiche for warranty
term information.