Protege LX L4-1489cc 1.5L DOHC MFI (1998)
1. Push the secondary piston component in fully.
2. Install and tighten a new O-ring and stop screw.
3. Push and release the piston to verify that it is held by the stop screw.
Stop Pin and O-ring (ABS model) Assembly Note
1. Install the secondary piston component with the piston hole facing the stop pin.
2. Install and tighten a new O-ring and stop pin.
3. Push and release the piston to verify that it is held by the stop pin.
