Protege LX L4-1489cc 1.5L DOHC MFI (1998)
NOTE:
-
This adjustment produces the illustrated clearance.
Piston to push rod clearance inspection (standard type)
1. Place the SST atop the master cylinder. Turn the adjusting bolt until it bottoms in the push rod hole in the piston.
2. Apply 66.7 kPa (500 mmHg, 19.7 inHg) vacuum to the power brake unit with a vacuum pump.
3. Invert the adjustment gauge used in step 1 and place it on the power brake unit.
4. Measure the clearance between the end of the gauge and the push rod of power brake unit.
5. Adjust it to the piston to push rod clearance as necessary.
Piston to push rod clearance adjustment (standard type)