Protege LX L4-1489cc 1.5L DOHC MFI (1998)
2. Apply silicone sealant to the shaded areas of the cylinder block as shown.
3. Apply silicone sealant to the stiffener along the inside of the bolt holes.
Thickness:
2.5 - 3.5 mm (0.099 - 0.137 inch)
4. Install the stiffener.
OIL PAN INSTALLATION NOTE
CAUTION:
-
If the bolts are reused, remove the old sealant from the bolt threads. Tightening a bolt that has old sealant on it can cause thread damage.
1. Apply silicone sealant to the contact surfaces of new oil pan gaskets as shown.
(1.8 Liter)