mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Cylinder Head Gasket|Diagrams|Page 964 > < Cylinder Head Gasket|Diagrams|Page 962
Page 1
background image

Cylinder Head Gasket: Service and Repair

WARNING:  

-

Fuel vapor is hazardous. It can very easily ignite, causing serious injury and damage.  Always keep sparks and flames away from fuel.

-

Fuel line spills and leaks are dangerous. Fuel can ignite and cause serious injuries or death and damage. Fuel can also irritate skin and
eyes. To prevent this, always complete the "Fuel Line Safety Procedures".
 

1. Disconnect the negative battery cable.
2. Drain the engine coolant. 
3. Remove the timing belt.
4. Remove the air cleaner and front pipe.
5. Disconnect the fuel hoses.
6. Remove the exhaust manifold.
7. Remove in the order indicated in the table.
8. Install in the reverse order of removal.
9. Fill the radiator and radiator reservoir with the specified amount and type of engine coolant. 

10. Start the engine and

1) Inspect for the engine oil and engine coolant leakage.
2) Inspect the ignition timing and idle speed. 

11. Inspect the compression

CAMSHAFT PULLEY REMOVAL NOTE 

Cylinder Head Gasket|Diagrams|Page 964 > < Cylinder Head Gasket|Diagrams|Page 962