Protege LX L4-1489cc 1.5L DOHC MFI (1998)
1. Verify that all timing marks are correctly aligned.
2. Install the timing belt on the pulleys in the order shown.
3. Install the pulley boss and pulley lock bolt. Turn the crankshaft clockwise 1 and 5/6 times, and verify that the timing mark on the timing belt pulley
is aligned with timing mark A (tensioner set mark).
4. Loosen the tensioner lock bolt to apply tension to the timing belt. Do not apply tension other than that of the tensioner spring.
5. Tighten the tensioner pulley lock bolt.
Tightening torque:
38 - 51 Nm (28 - 38 ft. lbs.)