mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Cooling System > < Water Pump|Specifications|Page 1088
Page 1
background image

Water Pump: Service and Repair

1. Disconnect the negative battery cable.
2. Drain the coolant. 
3. Remove the timing belt. See: Timing Components/Timing Belt/Service and Repair 
4. Remove in the order indicated in the image.
5. Install in the reverse order of removal.
6. Fill the radiator and radiator reservoir with the specified amount and type of engine coolant. See: Cooling System/Coolant/Service and Repair
7. Start the engine and inspect for coolant leakage.

Cooling System > < Water Pump|Specifications|Page 1088