Protege LX L4-1489cc 1.5L DOHC MFI (1998)
Refrigerant Pressure Sensor / Switch: Service and Repair
1. Disconnect the negative battery cable.
2. Remove the receiver/drier.
CAUTION:
-
If moisture or foreign material enters the refrigeration cycle, cooling ability will be lowered and abnormal noise will occur. Always
immediately plug all open fittings after removing any refrigeration cycle parts to keep moisture or foreign material out of the cycle.
3. Remove as indicated in the table.
4. Install in the reverse order of removal.
5. Charge the system and test its performance.