mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Power Steering Fluid > < Engine Oil|Capacity Specifications|Page 697
Page 1
background image

Engine Oil: Service and Repair

WARNING:

-

When the engine and the engine oil are hot, they can badly burn. Don't burn yourself with either.

-

A vehicle that is lifted but not securely supported on safety stands is dangerous. It can slip or fall, causing death or serious injury. Never
work around or under a lifted vehicle if it is not securely supported on safety stands.

-

Continuous exposure with USED engine oil has caused skin cancer in laboratory mice. Protect your skin by washing with soap and water
immediately after this work
.

PROCEDURE

1. Remove the oil filler cap and the oil pan drain plug.
2. Drain the oil into a container.
3. Install the drain plug and tighten to 30-41 Nm (22-30 ft. lbs.).
4. Refill the engine with the specified type and amount of engine oil.
5. Refit the oil filler cap.
6. Run the engine and check for oil leaks.
7. Check the oil level and add oil if necessary.

NOTE:  The actual oil level may vary from the specified capacity in some cases.

Power Steering Fluid > < Engine Oil|Capacity Specifications|Page 697