Protege LX L4-1489cc 1.5L DOHC MFI (1998)
Leak Detection Solenoid: Testing and Inspection
CANNISTER DRAIN CUT VALVE (CDCV) INSPECTION
1. Turn the ignition switch to ON and verify that a "click" is heard from the canister drain cut valve beside the fuel-filler lid after approximately 0.2
sec.
2. If no sound is heard, remove the canister drain cut valve. (Refer to EMISSION CONTROL SYSTEM, SERVICE AND REPAIR/FUEL
TANK AREA.)
3. Inspect air flow between ports of the solenoid valve.
4. If not as specified, replace the canister drain cut valve.
