Protege LX L4-1489cc 1.5L DOHC MFI (1998)
7. PUSH Number 7 under START to view PID's.
8. When you begin the drive mode PRESS TRIGGER to capture the data refer to the DRIVE MODE PROCEDURE.
NOTE: Watch the CDCV PID, when the evaporative system is tested the display will change from OFF to ON. And when the test is completed
the display will change back to OFF.
9. When the monitor changes back to OFF wait a few seconds then press the TRIGGER to save the recorded information.
10. Select VIEW RECORDING then press the TRIGGER.
11. Select both PID's by highlighting and pressing the TRIGGER.
12. Press the number key under GRAPH.
NOTE: It will be necessary to press Number 8 key to advance the graph to the point when the CDCV turned on.
