Protege LX L4-1489cc 1.5L DOHC MFI (1998)
Crankshaft Position Sensor: Testing and Inspection
CRANKSHAFT POSITION SENSOR TEST
1. Disconnect the crankshaft position sensor connector.
2. Measure the resistance between terminals A and B by using an ohmmeter.
Specification: 500 - 600 K ohms 20°C (68°F)
3. If not as specified, replace the crankshaft position sensor.
4. Measure the air gap between the crankshaft pulley projection and the crankshaft position sensor by using a feeler gauge.
Specification: 0.5 - 1.5 mm (0.020 - 0.059 in)
5. If not as specified, adjust the air gap.
