Protege LX L4-1489cc 1.5L DOHC MFI (1998)
Alignment: Service and Repair
Rear Wheel Alignment
TOTAL TOE-IN ADJUSTMENT
NOTE: In order to maintain the specified thrust angle of 0° ± 0.80°, the rear toe-in setting must be adjusted. If the thrust angle cannot be adjusted to
that specification, check the body dimensions.
1. Remove the cap.
2. Loosen the cam nut on the lateral link.
3. Turn the adjusting cam bolt to provide the correct total toe-in as indicated.
4. Tighten the cam nut.
Tightening torque: 35 - 53 Nm (26 - 39 ft. lbs.).
5. Install the cap.
