Protege LX L4-1489cc 1.5L DOHC MFI (1998)
Alignment: Technical Service Bulletins
Steering/Suspension - Camber Adjustment Procedure
Bulletin No.: 002/00R
Issued 06/23/00
Revised 09/13/00
Section: 02
Applicable Model/S
See Below
Subject:
CAMBER ADJUSTMENT
BULLETIN NOTE
This bulletin supersedes 02-002/00, issued 06/23/00. The REPAIR PROCEDURE section of this bulletin has been revised.
APPLICABLE MODEL(S)/VINs
All 1995-1998 Protege and all 2000-2001 MPV.
DESCRIPTION
This bulletin explains camber adjustment procedures for 1995-1998 Protege and 2000-2001 MPV. The current Workshop Manual does not indicate how
to use an adjusting washer in combination with an adjusting bolt during camber adjustment procedures.
When adjusting camber, use the following procedure.
REPAIR PROCEDURE
1995-1998 Protege
1.
Place the vehicle on a lift and remove wheel.
2.
Loosen UPPER pivot bolt.
