Protege LX L4-1489cc 1.5L DOHC MFI (1998)
Power Steering Pump: Testing and Inspection
1. Assemble the Special Service Tools (SSTs) as shown in the illustration.
Tighten torque: 30 - 39 Nm (22 - 28 ft. lbs.).
2. Mark both hose connections to ensure that the hose is reinstalled in its original position.
3. Disconnect the pressure hose from the power steering pump. Attach the SSTs (adapters).
4. Connect the SSTs (gauge set) to the SSTs (adapters).
5. Bleed the air from the system.
6. Open the gauge valve fully. Start the engine and turn the steering wheel fully left and right to raise the fluid temperature to 50 - 60°C (122 - 140°
F).
CAUTION: Do not let the valve stay closed for more than 5 seconds. The increase in fluid temperature will damage the oil pump.
7. Close the gauge valve completely. Increase the engine speed to 1,000 - 1,500 rpm and measure the fluid pressure generated by the power steering
pump. If the pressure is not within the specification, replace the power steering pump component.
Oil pump fluid pressure: 8.58 - 9.32 MPa (1,244 - 1,350 psi).
8. Open the gauge valve fully and increase the engine speed to 1,000 - 1,500 rpm.
