Protege LX L4-1489cc 1.5L DOHC MFI (1998)
9. Turn the steering wheel fully left. Measure the fluid pressure generated within the gear housing. Turn the steering wheel fully right. Measure the
fluid pressure generated within the gear housing. If the pressure is not within the specification, repair or replace the steering gear component.
Gear housing fluid pressure: 8.58 - 9.32 MPa (1,244 - 1,350 psi).
10. Remove the gauge set. Install and tighten the pressure hose to the specified torque.
Tightening torque: 30 - 44 Nm (22 - 32 ft. lbs.).
11. Bleed the air from the system.
